TERRADISC T Trailed short disc harrows 8.00 and 10.00 m Working width
With working widths of 8 and 10 meters, for trouble-free mixing of harvest residues and reliable operation in various conditions, even with high levels of straw and mulch.
Description
TERRADISC T - with a working width of 8 to 10 m. TERRADISC T models are transported on a dedicated chassis. This protects your tractor hydraulics and reduces compaction at the headland.
Advantages
TWIN ARM
Two solid forged carrier arms are welded to a very wide clamping bracket. This ensures that the discs always retain their position and angle. Even in heavy soil it is impossible for them to deviate to the side – hard wheel marks are broken up consistently.
Clever tillage tools
The rugged scalloped discs made of special heat-treated steel have a diameter of 580 mm. Eight discs per metre of working width equate to a spacing of just 12.5 cm. The optimised interplay of ground penetration angle and mounting angle ensure perfect performance. The offset configuration of the aggressive discs mixes harvest residues effectively into the soil.
The discs on TERRADISC harrows have an optimum diameter. The disc diameter of 580 mm ensures the whole surface is moved even at shallow working depths from 5 cm. At the same time, reliable mixing of the soil is enabled even when working deeper.
For high work loads
Maximum uptime and durability
Fast operating speeds and working depths down to 15 cm mean the disc bearings have to withstand considerable stress. That is why PÖTTINGER has implemented high-quality bearings for an extended service life. This guarantees you trouble-free work even in the most difficult operating conditions.
Tough and reliable
The special twin-race taper bearings have been adopted from the construction machinery industry. Ruggedness and reliability are guaranteed as a result and shock loads are absorbed effortlessly.
The sealed, twin-race taper bearings are completely maintenance-free.
A labyrinth seal provides the best protection for the bearing.
A metal cover encapsulates the labyrinth seal for additional security.
The bearings are fitted to the disc carrier arm by a stub axle.
The nuts are protected by caps mounted on the same stub shaft.
- Hydraulic depth adjustment via the rear rollers
- Disc mounting system in pairs on rigid, forged TWIN ARM supports
- Large support wheels for perfect ground contour following
- Choice of rear rollers for optimal consolidation
Reliability and flexibility
-
Reliable soil penetration, even in very dry conditions.
-
Crop residues are mixed without clogging.
-
Perfect seedbed preparation.
-
Working depths from 5 to 15 cm.
Intensive ground contour following with hydraulic pressure adjustment
- 6 degrees for positive slopes and 3 degrees for negative slopes.
- Uniform working depth.
- Reliable mixing of large amounts of organic matter thanks to the TWIN ARM system.
- Excellent soil movement.
- Optimal consolidation.
- Ideal use of the tractor’s pulling power – saves fuel.
Safe road transport
The 8 m and 10 m TERRADISC compact disc harrows are equipped with a special chassis as standard.
The chassis is mounted directly to the main frame and connected to the headstock. This ensures a very good center of gravity of the machine in the folded position and efficient weight transfer to the tractor. The wide chassis with 560 / 45-22.5 tyres provides smooth road travel. Transport width is 3 m, and transport height is under 4 m. TERRADISC 8001 T and 10001 T also offer impressive ground clearance.
Safety during transport
Air or hydraulic brakes are available as optional equipment. They ensure safety up to the maximum permitted driving speed. The parking brake complies with all legal requirements.
Wide selection of rear rollers for optimal consolidation and mixing
| Requirements | Tube roller | Cutting packer roller | Rubber packer roller | Tandem CONOROLL roller |
|---|---|---|---|---|
| Consolidation | o | ++ | ++ | ++ |
| Wet conditions | o | ++ | + | + |
| Dry conditions | ++ | ++ | ++ | ++ |
| Crushing effect | + | ++ | ++ | ++ |
| Load-bearing capacity | + | ++ | ++ | ++ |
| Self-propulsion | ++ | ++ | + | ++ |
| Suitability for stones | + | ++ | o | ++ |
| Scraper | no | yes | yes | no |
| Diameter (mm) | 660 mm | 550 mm | 590 mm | 560 mm |
| Weight (kg) TERRADISC 8001 T | 1300 kg | 1780 kg | 1500 kg | 2060 kg |
| Weight (kg) TERRADISC 10001 T | 1500 kg | 2110 kg | 1800 kg | 2450 kg |
WHAT DO OUR CUSTOMERS SAY ABOUT THE TERRADISC 8001T/10001T?
"Due to the harsh conditions three years ago, we decided to buy this harrow so that we could cultivate our fields in the autumn during dry weather. It performs quite well, is easy to adjust, and is sturdy. It currently covers 40,000 decares, and we have no complaints; we have not replaced any parts, and it works flawlessly,"
Hristofor Hristov, manager of Expa-Agro EOOD
Photos
Video
